Elta SPA400/46-3AC Plate Mounted Axial Flow Fan

A plate fan is an axial impeller mounted in a flat steel plate, made for through-the-wall or panel installation rather than in-line ducting. It moves high air volumes against minimal resistance, which suits workshops, plant rooms, kitchens, warehouses and agricultural buildings needing straightforward supply or extract ventilation. Our Elta plate range can be installed vertically or horizontally, and the corrosion-treated construction suits external mounting.

The Elta Compact SCP comes in ten sizes from 250mm up to 800mm, and the Raptor SPA in nine sizes from 250mm to 710mm — the size refers to the impeller diameter, and the plate dimensions for each model are on the datasheet in the Downloads tab. Across the ranges, air volumes reach 6.27 m³/s, so there’s a plate fan for anything from a small store room to a large production space.

Both ranges are available in AC and EC versions. AC motors are the conventional choice and the Raptor SPA offers 2-pole, 4-pole, 6-pole and 6/8-pole configurations in single or three-phase. EC motors cost more upfront but give full built-in speed control and lower energy consumption — the Compact SCP’s EC motors comply with the IE6 efficiency level. For fans running long hours, EC versions usually repay the difference in running costs.

Yes — the Raptor SPA is built as an industry workhorse with corrosion-resistant construction specifically suitable for external mounting, and both ranges carry weatherproofed electrical connections with an IP55 terminal box. Ingress protection on the fan itself varies by size — IP44 on smaller sizes and IP54 on 400mm and above for both ranges — so check the specification of your chosen size if the fan will be exposed.

Both Elta plate ranges are rated for operating temperatures up to +70°C, with the Compact SCP rated from -20°C to +70°C on AC fixed speed, reducing to +50°C when run with a speed controller and up to +60°C in EC form. Motors carry Class F insulation with integral thermal overload protection as standard. For hotter airstreams, look instead at our high temperature and bifurcated fan ranges.