45 Degree QF Bend
The 45° bend is the most versatile angle in an extraction system: two 45s make a sweeping alternative to a single 90° turn, and a 45° also matches the entry angle of QF branch fittings. All Nordfab QF 45° bends are galvanised steel with rolled ends that join to any same-diameter QuickFit component with a Quick Clip — no tools needed.
Seventeen diameters are available: smooth pressed bends from 80mm to 250mm (80, 100, 125, 140, 150, 160, 180, 200, 224 and 250mm) and segmented bends from 350mm to 710mm (350, 400, 450, 500, 560, 630 and 710mm).
Browse the other angles in QF Bends, or continue the run with QF straight duct.
Showing 1–16 of 17 results
-
Nordfab QF Bend Pressed – 80mm – 45° – Galvanised
£17.85 + VAT Add to basket -
Nordfab QF Bend Pressed – 100mm – 45° – Galvanised
£19.30 + VAT Add to basket -
Nordfab QF Bend Pressed – 125mm – 45° – Galvanised
£21.83 + VAT Add to basket -
Nordfab QF Bend Pressed – 140mm – 45° – Galvanised
£24.47 + VAT Add to basket -
Nordfab QF Bend Seg – 350mm – 45° – Galvanised
£56.61 + VAT Add to basket -
Nordfab QF Bend Pressed – 150mm – 45° – Galvanised
£26.94 + VAT Add to basket -
Nordfab QF Bend Pressed – 160mm – 45° – Galvanised
£26.99 + VAT Add to basket -
Nordfab QF Bend Seg – 400mm – 45° – Galvanised
£70.48 + VAT Add to basket -
Nordfab QF Bend Pressed – 180mm – 45° – Galvanised
£44.76 + VAT Add to basket -
Nordfab QF Bend Seg – 450mm – 45° – Galvanised
£84.77 + VAT Add to basket -
Nordfab QF Bend Pressed – 200mm – 45° – Galvanised
£49.08 + VAT Add to basket -
Nordfab QF Bend Pressed – 224mm – 45° – Galvanised
£55.54 + VAT Add to basket -
Nordfab QF Bend Seg – 500mm – 45° – Galvanised
£93.90 + VAT Add to basket -
Nordfab QF Bend Pressed – 250mm – 45° – Galvanised
£61.96 + VAT Add to basket -
Nordfab QF Bend Seg – 560mm – 45° – Galvanised
£162.15 + VAT Add to basket -
Nordfab QF Bend Seg – 630mm – 45° – Galvanised
£173.40 + VAT Add to basket